4" PROGRESSIVE ZIG BLADE

Features Bosch style Tang shank, (T-shank). Eliminates set-screw mounting hole, which is most common breaking point on Universal Mounting jigsaw blades. Packed 5 blades per card. No. T101B: Wood cutting, 4" long, 10 TPI, for straight fine cuts No. T101BR: Wood cutting, 4" long, 10 TPI reverse tooth, for plywood particleboard, plastics- splinter free cuts No. T101D: Wood cutting, 4" long, 6 TPI, for fast, straight cuts in wood, plastic, and particleboard, Available Only At Cape, Woodburn, Mesquite No. T111C: Wood cutting, 4" long, 8 TPI, fast, coarse cuts in wood, plastics for jigsaws without orbiting action No. T244D: Wood cutting, 4" long, 6 TPI, cuts for curves and plunge cuts, Available Only At Cape No. T119BO: Wood cutting, 3" long, 12 TPI, for narrow curve cutting No. T144D: Wood cutting, 4" long, 6 TPI, for straight cuts, and plunge and curves No. T101AO: Wood cutting, 3" long, 20 TPI, for fine, splinter-free cuts No. T234X: Wood cutting, 4-1/2" long, progressive teeth, for thick and thin materials, Available Only At Cape, Lexington, Woodburn, Mesquite No. T118A: Metal cutting, 3" long, 24 TPI, for thin, straight cuts in metal, nonferrous metal, aluminum, and sheet metal No. T118B: Metal cutting, 3" long, 14 TPI, for straight cuts in metal, nonferrous metal, and aluminum No. T118G: Metal cutting, 3" long, 36 TPI, for very thin material cuts in metal, nonferrous metal, sheet metal, aluminum No. T123X: Metal cutting, 4" long, progressive teeth, for fast cuts in sheet metal, nonferrous metal, and stainless steel, fiberglass, and plastics, Available Only At Cape, Lexington, Woodburn, Mesquite No. T318B: Metal cutting, 5-1/4" long, 14 TPI, for cutting sandwich materials in metal, nonferrous metal, aluminum, Available Only At Cape, Lexington, Woodburn, Mesquite No. T318A: Metal cutting, 5-1/4" long, 24 TPI, for cutting sandwich materials in metal, nonferrous metal, aluminum, Available Only At Cape, Lexington, Woodburn, Mesquite No. T118AF: Bimetal, 3" long, 24 TPI, for straight cuts in thin metal, nonferrous metal, and aluminum No. T118EF: Bimetal, 3" long, 18 TPI, for straight cuts in thick metal, sheet metal, and plexiglass No. T345XF: Bimetal, 5-1/4" long, progressive teeth, for thick and thin cutting in wood, metal, plastic, particle board, and aluminum, Available Only At Cape, Lexington, Woodburn, Mesquite No. T111CF: Bimetal, 4" long, 8 TPI, for straight cuts in wood, particle board, plastic, nonferrous metal, and aluminum No. T101BF: Bimetal, 4" long, 10 TPI, for straight fine cuts in plywood, plastics, fiberboard, and fiberglass